MTS
View
Capacity of the chuck : 1/32-1/2 (1-13mm Gauge length : 4″ Weight : 3.2Lb Draw bar : 7/16-20 Wrench is…
Made of Special Alloy Steel Surface hardened to 62 HRC Taper to shank runout <0.0002" Wrench not included ER32 Collet…
8 pieces of Sealed ER16 with hole sizes: 3, 4, 5, 6, 7, 8, 9, 10mm. Made of high alloy…
18 pieces of Sealed ER32 Collets with hole sizes 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,…
Tapping range from #5 to 1 1/8” (M3 to M30) Speed, Torque, Depth and Pitch adjustable on Control Panel Horizontal…
Tapping range: 5 to 1/2” (M2 to M12) Horizontal working radius range up to 70.9” (1800mm) Vertical working height range…
Shank: BT30 Pilot Diameter: 1" Gage length : 2.5" Draw bar: M12 x 1.75 Balanced G2.5 @20,000 RPM Taper to…
Shank : BT30 Pilot Diameter : 3/4" Gage length : 1.76" Draw bar : M12 x 1.75 Balanced G2.5 @20,000…
Made of Special Tool Steel Hardened 58-62HRC Taper : BT40 Pilot Diameter : 1-1/2" Gage length : 2.36" Draw bar…
Made of Special Tool Steel Hardened 58-62HRC Taper : BT40 Pilot Diameter : 1-1/4" Gage length : 2.36" Draw bar…
Made of Special Tool Steel Hardened 58-62HRC Taper : BT40 Pilot Diameter : 1" Gage length : 2.5" Draw bar…
Made of Special Tool Steel Hardened 58-62HRC Taper : BT40 Pilot Diameter : 3/4" Gage length : 2.5" Draw bar…
Shank : BT50 Pilot Diameter : 1 1/2" Gage length : 2.36" Draw ba r M24 x 3.0 Balanced G2.5…
Shank : BT50 Pilot Diameter : 1 1/4" Gage length : 2.36" Draw bar M24 x 3.0 Balanced G2.5 @20,000…
Shank : BT50 Pilot Diameter : 1" Gage length : 2.36" Draw bar M24 x 3.0 Balanced G2.5 @20,000 RPM…
Shank : BT50 Pilot Diameter : 2 1/2" Gage length : 2.36" Draw bar M24 x 3.0 Balanced G2.5 @20,000…