NOBL Tooling
View
Hardened to 62HRC Maximum 360º gripping along the bore High Precision Grinding Slim Body Design Coolant Through Spindle Rigid Construction…
Hardened to 62HRC Maximum 360º gripping along the bore High Precision Grinding Slim Body Design Coolant Through Spindle Rigid Construction…
Hardened to 62HRC Maximum 360º gripping along the bore High Precision Grinding Slim Body Design Coolant Through Spindle Rigid Construction…
Hardened to 62HRC Maximum 360º gripping along the bore High Precision Grinding Slim Body Design Coolant Through Spindle Rigid Construction…
Hardened to 62HRC Maximum 360º gripping along the bore High Precision Grinding Slim Body Design Coolant Through Spindle Rigid Construction…
Hardened to 62HRC Maximum 360º gripping along the bore High Precision Grinding Slim Body Design Coolant Through Spindle Rigid Construction…
Hardened to 62HRC Maximum 360º gripping along the bore High Precision Grinding Slim Body Design Coolant Through Spindle Rigid Construction…
Taper: HSK63A (taper & face contact by design) Collet Type: ER16 (accepts 1/16-3/8 /1 mm–10 mm ) Gage Length: 4″…
Taper: HSK63A (taper & face contact by design) Collet Type: ER16 (accepts 1/16-3/8 /1 mm–10 mm ) Gage Length: 6"…
Taper: HSK63A (taper & face contact by design) Collet Type: ER16 (accepts 1/16-1/2 /1 mm–13 mm ) Gage Length: 6"…
Taper: HSK63A (taper & face contact by design) Collet Type: ER25 (accepts 1/8-5/8 /2 mm–16 mm ) Gage Length: 4″…
Taper: HSK63A (taper & face contact by design) Collet Type: ER25 (accepts 1/8-5/8 /2 mm–16 mm ) Gage Length: 6″…
Taper: HSK63A (taper & face contact by design) Collet Type: ER32 (accepts 1/8-3/4 /3 mm–20 mm ) Gage Length: 6″…
Tension and compression design compensates for minor feed synchronization errors during tapping Reduces tap breakage and improves thread quality, especially…
Tension and compression design compensates for minor feed synchronization errors during tapping Reduces tap breakage and improves thread quality, especially…
Made of Alloy Steel Hardened to 58-62HRC Balanced to G2.5 at 25,000RPM Taper to Taper runout : 0.0004" Projection Gage…