Carbide End Mill Variable Helix Diameter D : 6mm Length of Cut L1 : 15mm Shank Diameter S : 6mm…
6mm Vari-Helix 4FL Carbide End Mill
- Carbide End Mill Variable Helix
- Diameter D : 6mm
- Length of Cut L1 : 15mm
- Shank Diameter S : 6mm
- Overall Length L : 50mm
- Efficient Cheap Evacuation
- Improved Surface Finish
- Reduced Cutting Forces
$24.45
27 in stock
With ratchet friction Thimble Graduation : 0.0001" Accuracy : ± 0.00015" Carbide measuring face Frame painted, scale chrome finished Including…
7-8″ Outside Micrometer
- With ratchet friction Thimble
- Graduation : 0.0001″
- Accuracy : ± 0.00015″
- Carbide measuring face
- Frame painted, scale chrome finished
- Including Setting Gauge
- With adjusting key
- Supplied with Inspection Certificate
- Delivered in plastic box
$116.89
Out of stock
Digital 3-Point Internal Micrometer Satin Chrome Finished IP65 Water and Dust resistant Ideal for Through and Blind Holes With Carbide…
7-8″/175-200mm Digital Three-Point Internal Micrometer
- Digital 3-Point Internal Micrometer
- Satin Chrome Finished
- IP65 Water and Dust resistant
- Ideal for Through and Blind Holes
- With Carbide measuring Tips
- Measuring tips : 0.020″/0.5mm
- Measuring Depth : 5.9″ / 150mm
- Measuring Range :7-8″ (175-200mm)
- Extension Length : 5.9″/150mm
- Reading : 0.00004″ / 0.001mm
- Accuracy : ±0.00016″/0.004mm
- Inch / MM button
- Extension included
- Buttons : ON/OFF/SET , ABS/INC/UNIT
- Packed in Aluminum Box
- Brand : Werka
$2,025.56
2 in stock
Modular workholding system designed for flexible CNC machining and production environments Expandable design allows multiple vises to be connected on…
7″ x 12″ Precision Modular Machine Vise
- Modular workholding system designed for flexible CNC machining and production environments
- Expandable design allows multiple vises to be connected on a single machine table
- Can be mounted horizontally or on its side for maximum setup versatility
- Precision-ground on all reference surfaces for excellent accuracy and repeatability
- High clamping force ensures secure and stable workpiece holding during heavy machining
- Pull-down jaw action minimizes workpiece lift and improves machining accuracy
- Hardened and ground jaws provide exceptional wear resistance and long service life
- Rigid construction minimizes vibration and enhances surface finish quality
- Precision guideways ensure smooth jaw movement and consistent clamping performance
- Quick setup and repositioning reduce machine downtime and increase productivity
- Ideal for CNC milling, drilling, tapping, boring, and precision machining operations
- Designed for high-accuracy production environments where repeatability is critical
- Precision-ground on all surfaces, allowing accurate positioning in both horizontal and vertical mounting applications
- Width B : 7″
- Opening Smax : 12″
- Jaw Height H: 2.36″
- Bed Height T : 2.76″
- Overall Length L : 21.85″
- Accuracy : 0.0002″
$1,965.80
2 in stock
Ideal for Tap size : 7/16, M10 Collet Shank Diameter : 0.750" (19mm) Tap Shank Diameter : 0.328" Tap Square…
7/16 / M10 Torque Control Tap Collet System #1 ANSI Shank
- Ideal for Tap size : 7/16, M10
- Collet Shank Diameter : 0.750″ (19mm)
- Tap Shank Diameter : 0.328″
- Tap Square : 0.242″
- Ideal for Tap size : 7/16, M10
- Tapping collet with safety overload.
- Interchangeable with Bilz system # 1
$69.00
9 in stock
Uncoated Carbide End Mill Diameter D : 7/16 Length of Cut L1 : 1" Shank Diameter S : 7/16 Overall…
7/16 Carbide End Mill 3FL Alu.
- Uncoated Carbide End Mill
- Diameter D : 7/16
- Length of Cut L1 : 1″
- Shank Diameter S : 7/16
- Overall Length L : 3″
- Efficient Cheap Evacuation
- Improved Surface Finish
- Reduced Cutting Forces
- Ideal to cut : Aluminum, Copper, Brass, Plastic
$54.90
8 in stock
Uncoated Carbide End Mill with Long Reach Diameter D : 7/16 Length of Cut L1 : 2" Shank Diameter S…
7/16 Carbide End Mill 3FL Alu. Long Length
- Uncoated Carbide End Mill with Long Reach
- Diameter D : 7/16
- Length of Cut L1 : 2″
- Shank Diameter S : 7/16
- Overall Length L : 4″
- Efficient Cheap Evacuation
- Improved Surface Finished
- Ideal for Machining : Aluminum, Copper, Brass, Bronze, Plastic
$94.22
4 in stock
Ideal for Rigid Tapping According to ANSI Standard Taps Square drive prevents spinning the tap Compatible with ER16 Collets Collet…
7/16 ER16 ANSI Rigid Tap Collet
- Ideal for Rigid Tapping
- According to ANSI Standard Taps
- Square drive prevents spinning the tap
- Compatible with ER16 Collets
- Collet Bore D : 0.323″
- Collet Square S : 0.242″
- For Taps : 7/16, M10
$26.50
5 in stock
Ideal for Rigid Tapping According to ANSI Standard Taps Square drive prevents spinning the tap Compatible with ER20 Collets Collet…
7/16 ER20 ANSI Rigid Tap Collet
- Ideal for Rigid Tapping
- According to ANSI Standard Taps
- Square drive prevents spinning the tap
- Compatible with ER20 Collets
- Collet Bore D : 0.323″
- Collet Square S : 0.242″
- For Taps : 7/16, M10
$26.50
10 in stock
Higher gripping force due to the optimized slot design, providing more secure tool clamping. Increased rigidity compared to full-slot designs,…
7/16 ER20 Sealed Collet
- Higher gripping force due to the optimized slot design, providing more secure tool clamping.
- Increased rigidity compared to full-slot designs, helping reduce collet deflection under heavy cutting loads.
- Reduced vibration and chatter, resulting in improved surface finish and longer tool life.
- Better suited for heavy milling operations, especially with larger diameter end mills and higher cutting forces.
- Maintains an effective coolant seal, delivering coolant efficiently to the cutting zone while minimizing leakage.
- Improved machining accuracy through more stable tool holding and reduced runout.
- Longer collet life, as the modified slot design distributes clamping stresses more evenly.
- Compatible with standard ER collet chucks designed to DIN 6499 / ISO 15488 specifications.
- Made of high Alloy Spring Steel
- Surface hardened to 44-48 HRC
- Maximum gripping force
- Runout accuracy : 0.0004″
- Size : 7/16
- Overall Diameter : 21mm
- Overall Length : 31mm
$23.80
5 in stock
Made of high Alloy Spring Steel Hole Diameter : 7/16 inch Range : 0.437″ to 0.397″ Hardened to 44-48 HRC…
7/16 ER32 Sealed Collet
- Made of high Alloy Spring Steel
- Hole Diameter : 7/16 inch
- Range : 0.437″ to 0.397″
- Hardened to 44-48 HRC
- Concentricity : 0.0002″
$26.00
14 in stock
Collet series MC0.75 Made from Alloy Spring Steel Runout tolerance within 0.0004" All critical surfaces are ground Collet size :…
7/16 MC 0.75 Milling Chuck Collet
- Collet series MC0.75
- Made from Alloy Spring Steel
- Runout tolerance within 0.0004″
- All critical surfaces are ground
- Collet size : 7/16
$38.40
10 in stock
Collet series MC1.25 Made from Alloy Spring Steel Runout tolerance within 0.0004" All critical surfaces are ground Collet size :…
7/16 MC 1.25 Milling Chuck Collet
- Collet series MC1.25
- Made from Alloy Spring Steel
- Runout tolerance within 0.0004″
- All critical surfaces are ground
- Collet size : 7/16
$44.90
10 in stock
High Performance Carbide End Mill 38º/40º Variable Helix TiAlN PVD Coated Diameter D : 7/16 Length of Cut L1 :…
7/16 Vari-Helix 4FL Carbide End Mill
- High Performance Carbide End Mill 38º/40º Variable Helix
- TiAlN PVD Coated
- Diameter D : 7/16
- Length of Cut L1 : 1″
- Shank Diameter S : 7/16
- Overall Length L : 3″
- Efficient Cheap Evacuation
- Improved Surface Finish
- Reduced Cutting Forces
- Brand : 7Sieb
$54.41
1 in stock
High Performance Carbide End Mill 38º/40º Variable Helix TiAlN PVD Coated Diameter D : 7/16 Length of Cut Lc :…
7/16 Vari-Helix 4FL Long Length Carbide End Mill
- High Performance Carbide End Mill 38º/40º Variable Helix
- TiAlN PVD Coated
- Diameter D : 7/16
- Length of Cut Lc : 2″
- Shank Diameter S : 7/16
- Overall Length L : 4″
- Efficient Cheap Evacuation
- Improved Surface Finish
- Reduced Cutting Forces
- Brand : 7Sieb
$78.98
5 in stock
Solid Carbide Coolant-Thru Micro Thread Mill Coating : ALCRN PVD Coated High Performance, High Wear Resistance Thread : 7/16-14 Ideal…
7/16-14 Coolant-Thru Micro Thread Mill
- Solid Carbide Coolant-Thru Micro Thread Mill
- Coating : ALCRN PVD Coated
- High Performance, High Wear Resistance
- Thread : 7/16-14
- Ideal for : Steel, Stainless Steel, Supper Alloys
- Diameter D : 0.362″
- Shank Diameter S : 0.394″
- Length of Cut L1 : 1.339″
- Overall Length L : 3″
- Number of Flute : 4
- Can be used for Internal and External Threading
$220.31
6 in stock
