Tooling System
View
Capacity of the chuck : 0.020" - 0.315" (0.5-8mm) Chuck Diameter D : 1.47″ Gauge length L : 2.9″ Draw…
Taper : BBT30 Dual Contact Collet Type : ER11 (1 mm–7 mm / 1⁄16"–1/4") Gage Length : 4" (from gauge…
Taper : BBT30 Dual Contact (BIG-PLUS® style) Collet Type : ER16 (1 mm–10 mm / 1⁄16"–3⁄8") Gage Length : 2.76"…
Taper : BBT30 Dual Contact (BIG-PLUS® style) Collet Type : ER16 (1 mm–10 mm / 1⁄16"–3⁄8") Gage Length : 4"…
Taper : BBT30 Dual Contact (BIG-PLUS® style) Collet Type : ER20 (1 mm–13 mm / 1⁄16"–1/2") Gage Length : 2.76"…
Taper : BBT30 Dual Contact (BIG-PLUS® style) Collet Type : ER20 (1 mm–13 mm / 1⁄16"–1/2") Gage Length : 4"…
Made of high-grade hardened steel for durability and long-lasting performance Accept Standard ER20 Collets (available in Imperial and MM) Provides…
Taper : BBT30 Dual Contact Collet Type : ER25 (1mm–16 mm / 1⁄16"–5/8") Gage Length : 2.76" (from gauge line…
Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground Dynamically balanced to G2.5 at…
Taper : BBT30 Dual Contact Collet Type : ER32 (1mm–20mm / 1⁄16"–3/4") Gage Length : 2.76" (from gauge line to…
Synchro (Floating) ER Tap Collet Holder Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are…
BT30 Retention Knob/Pull Stud Draw Bar Thread T : M12 x 1.75 Gripping Angle a : 45° L1 : 0.903″…
BT30 Retention Knob/Pull Stud Draw Bar Thread T : M12 x 1.75 Gripping Angle a : 45° L1 : 0.903″…
Rigid Quick Change Tapping Holder Interchangeable with BILZ System #1 Gauge Length : 3.45" Draw bar : M12x1.75 Quick Change…
Tension and Compression Quick Change Tap Collet Holder Interchangeable with BILZ System #1 Gauge Length : 3.45″ Draw bar :…
Tool holder locking Fixture Ideal for :BT30 Chucks
