Tooling System
View
Made of Special Alloy Steel Hardened 58-62HRC Balanced G2.5 at 20,000RPM Taper to Morse accuracy : less than 0.0002" Morse…
Made of Special Alloy Steel Hardened 58-62HRC Balanced G2.5 at 20,000RPM Taper to Morse accuracy : less than 0.0002" Morse…
Made of Special Alloy Steel Hardened 58-62HRC Balanced G2.5 at 20,000RPM Taper to Morse accuracy : less than 0.0002" Morse…
Made of Special Alloy Steel Hardened 58-62HRC Balanced G2.5 at 20,000RPM Taper to Morse accuracy : less than 0.0002" Morse…
Made of Special Alloy Steel Hardened 58-62HRC Balanced G2.5 at 20,000RPM Taper to Morse accuracy : less than 0.0002" Morse…
Made of Special Alloy Steel Hardened 58-62HRC Balanced G2.5 at 20,000RPM Taper to Morse accuracy : less than 0.0002" Morse…
Works with REVERSIBLE TAPPING ATTACHMENT VTA20-M20. Connects morse taper MT4 to female thread M20.
Made of special alloy Steel All critical surfaces are ground and hardened Hardened to 58-62HRC L2 : 3.63" L :…
Made of special alloy Steel All critical surfaces are ground and hardened Hardened to 58-62HRC L2 : 2.638 ″ L…
Made of special alloy Steel All critical surfaces are ground and hardened Hardened to 58-62HRC L2 : 3.307 ″ L…
Made of special alloy Steel All critical surfaces are ground and hardened Hardened to 58-62HRC L 2: 4.213″ L :…
Made of high grade Tool Steel Long end (with tang) : Morse 3 Short end : JT3 Fit on any…
Made of high grade Tool Steel Long end (with tang) : Morse 4 Short end : JT3 Fit on any…
Taper : IMTB40 /ISA40 Made of Special Alloy Steel Surface hardened to 62 HRC All critical surfaces are ground. Arbor…
Capacity of the chuck : 1/32-1/2 Gauge length : 4″ Weight : 3.2Lb Draw bar : 5/8-11 Wrench is not…
Taper : NMTB50/ISA50 Made of Special Alloy Steel Surface hardened to 62 HRC Pilot Diameter : 1.5" Gage length :…
